Waterbased Sealers Create a High Gloss Finish and Excellent Durability

AQUATEK is one of the most advanced formulation waterbased sealers in the market. Aquatek was designed to create a high gloss finish with excellent exterior durability properties. Easily applied with a brush and roller, has no harsh smell, and dries quickly.

ADVANTAGES

Cures, Seals, Dustproofs
High Gloss Finish
Resistant to Waterblushing
Non-Yellowing and UV Stable
Low VOC content
Excellent Stain Resistance
Excellent Peel Adhesion
Good Chemical Resistance
Excellent Anti-spalling Material
Solvent Free
Dries Quickly
Ready to Use

USES

Horizontal or vertical concrete surfaces
Interior or Exterior
Commercial, Industrial or Residential Structures

PHYSICAL CHARACTERISTICS

Recommended Coats 2
Dilution: None, use as supplied
Physical State: Liquid
Color: Pale White
Flashpoint: 60 C or 140 F
Weight: 8.5 lbs
Skinning: None
Cleaning Equipment: Water
Coverage: 200 sq ft/gal
Drytime: 30 to 60 minutes 21 C (70 F)
VOC: ~70 grams/Litre

LIMITATIONS

DO NOT DILUTE PRODUCT OR ALTER IN ANY WAY.
Do not apply to temperatures below 10 C or 50 F
Do not store in a place where the product will freeze
Poor brake fluid and gasoline resistance

APPLICATION

CURING NEW CONCRETE:
Surface must be sound and properly finished. Application can be made as soon as surface water has disappeared and slab can support the weight of an applicator. Apply at 200 sq. ft. per gallon. A second coat should be applied at right angles to the first coat.

SEALING NEW CONCRETE:
For an excellent sealer and added protection to concrete cured with product, apply a second coat after 28 days of curing. If not previously applied when curing concrete, apply two coats, second coat four hours after first coat. Area to be sealed must be cleaned and free of all foreign matter such as dirt, rubber marks, paint, etc. Apply at 200 sq. ft. per gallon, on dry surface.
Apply with spray, brush, or roller. Apply AquaTek uniformly to form a continuous film.

DUST PROOFING/SEALING AGED CONCRETE:
Surface must be structurally sound and free of foreign matter such as grease, oil, dirt, and incompatible sealers and coatings. Use Cornerstone's Industrial Cleaner and Degreaser to clean dirty concrete followed by a thorough rinse with clean water. Surface must dry prior to application. Two coats are necessary for maximum protection. Apply second coat four hours after first.

PACKAGING

55 gallon / 208 litre drums
5 gallon/ 18.9 litre pails

COVERAGE

200 square feet/gallon (depending on porosity of surface)

DRYING TIME

At 21 C (70 F) with 50% R.H.
Dry to touch - 30 to 60 minutes
Re-Coat - 4 to 6 hours
Light foot traffic - 8 hours
Normal traffic - overnight
Maximum hardness - 7 days